Garage Door Maintenance: 8 Important Tips

If you use your garage door daily, then regular—and proper—maintenance is imperative. This ensures maximum operational efficiency which minimizes the risk of damage to the door saving you money in the long run.

Garage doors that aren’t maintained are potential hazards to users; springs and motors of the door’s infrastructure become dangerous. Regular servicing will significantly prevent injuries or fatalities. This is why we’re going to give you a few tips on how to maintain it—or contact any of the garage doors Melbourne industry specialists would suggest to you.

Always Be Alert

When it comes to a garage door, it pays to be proactive. Always keep your eyes and ears open so you can quickly pick up any unusual sounds or if anything is out of place.

Your garage door must open and close smoothly with no jerking or stalling. It should also produce very little sound. Be sure to be on the look-out for any weird grinding or scraping sounds.

Tighten the Hardware Regularly

The frequent opening and closing of the garage door result in a lot of pressure being exerted on the small parts that keep the unit functioning properly. Over time this movement causes the bolts and roller brackets to loosen. We suggest that you keep a socket wrench within reach to retighten this hardware regularly.

Always Check the Garage Door’s Balance

For the garage door to function optimally, it needs to be balanced. An imbalanced garage door won’t function properly because stress is exerted on the opener. In extreme cases, the door will break if the matter is left unresolved.

Checking whether your door is balanced is pretty easy.  Simply pull the release handle and manually move the door up halfway. If the door doesn’t remain in that position, it means the balance is off so you must immediately contact a professional.

Regular Inspection of Rollers

A garage door heavily relies on the proper functioning of its rollers. This is why it’s important to inspect the rollers to check if they aren’t worn out. The general rule of thumb is to inspect them at least twice a year to ensure they aren’t damaged. The frequency of your inspections will depend on how often you use the door. If you use the door very frequently then you must check them sooner.

Note that replacing rollers is a relatively simple process; you simply remove the brackets, slide off the old rollers and insert new ones.

Lubrication is Key

Lubrication is an important part of the maintenance process. And the best part is you can do it yourself. Apply lubrication spray to the overhead springs and white lithium grease to the chain every once in a while. Both lubricants are easily obtainable at your nearest home improvement store.

Other areas you must lubricate include the hinges, rollers and all pivot points. You can do this at least once a year depending on frequency of door usage.

Inspect Cables and Weatherstripping

A garage door also relies on high tension cables to function effectively. These cables are designed to lift your door and any damage to them can cause serious injuries. Always inspect if they’re still intact. If you find anything amiss, be sure to report the problem to a professional right away.

You also need to inspect the weatherstripping which runs along the bottom of your garage door. This stripping is designed to keep out the cold including water, dust and dirt. When it’s shut, a secure seal is usually formed. The stripping tends to become brittle and can crack over time. This is why regular inspection is crucial to check if it’s in need of replacing.

Are the Safety Features Working?

All garage doors come with safety features installed by the manufacturers to eliminate user injury during operation. The main safety feature you need to look out for is the auto reverse functionality.

This feature causes the door to stop and reverse its direction if it detects an object in its path. Detection of this object is done by a pressure sensor or a pair of photocells located on each side of the door.

It’s advisable to check if they’re working every now and again. You do this by placing a brick or piece of wood in the door’s path and check if it backs up immediately when it senses the object. Failure to respond timeously—or at all—means the safety mechanisms are worn out and need replacing.

Are the Tracks Clear?

It’s not uncommon for excessive debris or other materials to get stuck in your garage door tracks. This unfortunately causes unnecessary friction and inability of the door to function smoothly. Such situations can easily be rectified by inspecting and cleaning out these tracks regularly where necessary.

Use a cloth and concentrated non-corrosive cleaner to wipe the tracks. Don’t forget to clean all the exposed parts of the roller. Make sure you remove excessive moisture during cleaning to prevent rusting which may affect performance and the overall look of the door.

Final Words

Aside from the mechanical aspect, also take time to maintain the general aesthetics of your garage door. Add a fresh coat of paint if you notice any chipping or warping on the door. It can help that it lasts longer.

If you have a steel door, then always be on the look out for rust spots. Corrosive chemicals can easily be removed by regular washing with water and a mild detergent.

Make it a habit to clean your garage door. After all, it does add to the overall look of your home, right?

Leave a Reply

Your email address will not be published. Required fields are marked *

× 2 = sixteen